LE-466

• Built-in solenoid for electrically unlocking.
• Can be unlocked with a key in emergency.
• Pressing handle button switch allows open/locked signal to be output.
• A leaf spring as the handle shaft improves retraction.
• Uses lightweight, durable glass fiber-strengthened resin.

LE-467-ND

• Built-in solenoid for electrically unlocking.
• Can be unlocked with a key in emergency.
• Pressing handle button outputs signal.
• LED status can be checked from handle button.
• Capable of outputting lock/unlock signal.
• TAK-series key can be used to match security system.
• Uses lightweight, durable glass fiber-strengthened resin.

LE-468

• Prevents mischief to EV connector during charging or when not in use.
• Can be used with a CHAdeMO connector.
  ※Cannot be used with some connectors. Contact us for details.
• 3 types available: with key (CP-468-1), with solenoid (LE-468), and holder only (CP-468-2).
• Open bottom on connector pocket prevents dust and dirt from collecting.
• Can be easily installed from rear with four M6 screws.
• Can also be used combined with CP-468-P-1 to prevent recharging connector terminal from getting wet (equivalent to IPX4).
• Connector lock/unlock can be controlled with received electric signal from main rapid recharger unit.
• Indicator for quickly checking whether locked/unlocked.
  Solenoid specifications (energized unlocked)
  Rated voltage: DＣ24V
  Rated current: 104mA
  Energization rate: 100％
  Ambient temperature: -10℃ to +50℃
  (no freezing)
  LED specifications
  Rated voltage: DC24V
  Rated current: 17mA
  Built-in resistor
  SW1, SW? specification
  Rated voltage: DC30V/3A (resistance load)
  (Minimum resistance load DC5V/160mA)

LE-469-DC

• Built-in solenoid for electrically unlocking.
• Capable of outputting lock/unlock signal.
• Can be unlocked with a key in emergency.
• TAK-series key can be used to match security system.

LE-500

• Can be added to existing racks to convert to electric specifications.
• Capable of outputting lock/unlock and arm open/close signals.
• Can be unlocked with a key in emergency.
• Rearrangeable arm allows variations in installation.

LE-501

• Compact type.
• Built-in fuse and surge absorber. (fuse non-recycle type)

LE-51

• Locks automatically when the door is pushed shut (when power is off).
• For both left- and right-side use.
• Slim type, only 17.2 mm thick.
• With two types of LED.
• With solenoid (stopper) and cam switch.

LE-52

• Locks automatically simply by pushing door (when unenergized)
• Unlocked when energized
• For both left-hand and right-hand use.
• Slim 10.2mm type
• With cam switch

LE-520N

• DC24V output power is available.

LE-53

• Locks automatically simply by pushing door (when unenergized)
• Unlocked when energized
• For both left-hand and right-hand use
• With cam switch
• Energy-saving DC5V/2W power, allows operation on batteries alone

LE-54

• Locks automatically simply by pushing door (when unenergized)
• Unlocked when energized
• Compact, 52mm-depth type
• With cam switch: on when cam-locked

LE-550

• Power outlet that can be fastened to an IV pole.
• Outlet and plug are JIS T 1021 hospital grade-compliant parts
• Receptacles are recessed and angled downward to minimize any chance of short-circuiting from seepage of liquid.

LE-60

• The AC type of the solenoid lock.
• The latch mechanism is incorporated. (auto-locking type)
• Can be operated with a remote control.
• Both front and rear surface attachment. (remove the cover when choosing the front surface attachment)
• Equipped with emergency lock release mechanism for unlocking when not energized. (LE-60-E・ES)
• Locking/unlocking can be checked the signal. (LE-60-S・ES)

LE-70

• Corrosion-resistant stainless steel is used.
  (solenoid section is coated with Teflon)
• Turn power ON to unlock solenoid electric lock. (excitation unlocking type)
• The latch mechanism is incorporated. (auto-locking type)
• The front and the rear surface installation hole are the same as LE-30-11/LE-33-11. (The height of the latch is different.)
• Both front and rear surface attachment. (remove the cover when choosing the front surface attachment)

LE-73

• Made from corrosion-resistant stainless steel (solenoid section is coated with Teflon).
• Turn power on to lock solenoid electric lock (energized locking type).
• Front and rear mounting holes are the same as LE-30-11 and LE-33-11. (Latch height is different.)
• For both front and rear surface attachment. (Remove cover when attaching to front surface)