LE-468 CONNECTOR LOCK SERIES FOR RAPID RECHARGER

LE-468 CONNECTOR LOCK SERIES FOR RAPID RECHARGER catalogue manual
LE-468 CONNECTOR LOCK SERIES FOR RAPID RECHARGER catalogue manual

Features

LE-468
  • Prevents mischief to EV connector during charging or when not in use.
  • Can be used with a CHAdeMO connector.
    ※Cannot be used with some connectors. Contact us for details.
  • 3 types available: with key (CP-468-1), with solenoid (LE-468), and holder only (CP-468-2).
  • Open bottom on connector pocket prevents dust and dirt from collecting.
  • Can be easily installed from rear with four M6 screws.
  • Can also be used combined with CP-468-P-1 to prevent recharging connector terminal from getting wet (equivalent to IPX4).
  • Connector lock/unlock can be controlled with received electric signal from main rapid recharger unit.
  • Indicator for quickly checking whether locked/unlocked.
    Solenoid specifications (energized unlocked)
    Rated voltage: DC24V
    Rated current: 104mA
    Energization rate: 100%
    Ambient temperature: -10℃ to +50℃
    (no freezing)
    LED specifications
    Rated voltage: DC24V
    Rated current: 17mA
    Built-in resistor
    SW1, SW? specification
    Rated voltage: DC30V/3A (resistance load)
    (Minimum resistance load DC5V/160mA)

Specification

  • Material: Case: Resin (PBT/PC)
    Mechanical parts: SUS304
  • Finish: Coated (black)

Specific Uses

CP-468
  • Prevents mischief to EV connector during charging or when not in use.
  • Can be used with a CHAdeMO connector.
    ※Cannot be used with some connectors. Contact us for details.
  • 3 types available: with key (CP-468-1), with solenoid (LE-468), and holder only (CP-468-2).
  • Open bottom on connector pocket prevents dust and dirt from collecting.
  • Can be easily installed from rear with four M6 screws.
  • Can also be used combined with CP-468-P-1 to prevent recharging connector terminal from getting wet (equivalent to IPX4).
  • Simple structure which simply holds connector.
  • Installation dimensions same with other types, allowing replacement with key- or solenoid-operated types according to use.
  • Lock uses reversible key with dustproof shutter. Key can be removed at two positions, allowing lock to remain unlocked.
  • By special order, key specifications can be changed for key differences or customer-specified number. Consult with TAKIGEN.
  • Indicator for quickly checking whether locked/unlocked.
  • By special order, a connector detection switch can be set.

Remarks

  • Be sure to test adequately when using a solvent such as thread-locking fluid.

Model ROHS Remarks Code Ask Price 2D 3D
LE-468 ROHS 50351 Email Whatsapp
CP-468-1 ROHS 24651 Email Whatsapp
CP-468-2 ROHS 24691 Email Whatsapp
CP-468-P-1 ROHS 24810 Email Whatsapp