All Products
1315 results
FA-602S-3
- To prevent accident by shut-up both handles and bases are equipped with the safety device. (Double safety escape mechanism)
FA-602S-7
- Engagement with latch can be adjusted 4mm fore and aft.
- Equipped with escape mechanism to prevent accidental confinement.
- Use with FC-708 inside escape knob for safety.
- Installation is the same as for FA-602S-6.
- Offset adjustment range: 40-70mm
FA-630
- Rod moves 23mm vertically so the door is locked firmly.
- Locking (green) and unlocking (red) can be identified easily.
- Handle operating direction is clarified with the arrow.
- Rod installing position can be adjusted.
- The clockwise or counterclockwise use (drawings and photo show the clockwise use).
FA-662
- Prevents spread of germs and mold.
- Keep antibacterial effects for almost semi permanent periods.
- Installation is same as the safety handles for airtight closure FA-602.
- New appearance thanks to the dressing cover.
- Safety mechanism is incorporated in the lock and padlock so door can be unlocked from inside by operating the safety push rod. (FC-701/FC-702)
- Can also be locked with the lock pin (FA-662-P) and long-neckpadlock (C-555-30/35).
- For both left-hand and right-hand use.
FA-662S
- Prevents spread of germs and mold.
- The antibacterial effects last semi permanently.
- Installation is compatible with the catch FA-602S for FA-602.
- Design is brand-new with the dressing cover.
- Installation screws are hidden to prevent crimes.
- With oblong hole, the engagement position can be adjusted 3mm front and rear.
- Offset height can be adjusted by loosening the catch screw and sliding it.
- The emergency escape device can be attached to prevent the trouble with shut-up.
- Two installations: use the installation part A for the emergency escape device and use the B for surface attachment.
FA-680
- Combination with the double-latch lock C-628 makes possible two-stage opening and closing, allowing heat and steam to escape from the oven.
- Combination with a latch lock allows one-touch closing at the upper and lower points.
- The plastic large-sized handle is a small heat conduction type.
- A totally round-shaped design creates a soft image.
FA-681
- Safety design allows steam and hot air to escape through the gap in the door created by pulling the handle.
- Pushing the handle lever moves the stopper plate 6mm, firmly closing the door.
- The latch-type catch acts as a safety mechanism, protecting the oven and handle from strain in the event of incorrect operation.
- Pressing the door lightly closes it. (When using FA-681-S-1 or FA-681-S-2)
- Trigger type is also available. (FA-681-T)
- Low heat-conduction type resin lever.
- For left-hand and right-hand use. (Drawings and photo show right-hand use.)
FA-681-S
- Use with FA-681-1 or FA-681-T-1 to close the door with a single touch.
- FA-681-S-1 embedded type features an inconspicuous latch and max. adjustment of 6mm.
- FA-681-S-2 surface attachment type allows easy installation and maintenance and max. adjustment of 10mm.
FA-682
- Smooth operation is provided by the action of the rollers, ensuring that the door is securely airtight. (Clamping quantity FA-682-1: 6mm FA-682-2: 6.5mm)
- Low heat-conductive resin lever is ideal for industrial ovens.
- When turned, handle clicks and is held at 0 and 60 degrees.
- Catch roller can be adjusted.
- For right-hand use (turns clockwise) and left-hand use (turns counterclockwise).
FA-682S
- Smooth operation is provided by the action of the rollers, ensuring that the door is securely airtight. (Clamping quantity FA-682-1: 6mm FA-682-2: 6.5mm)
- Low heat-conductive resin lever is ideal for industrial ovens.
- When turned, handle clicks and is held at 0 and 60 degrees.
- Catch roller can be adjusted.
- For right-hand use (turns clockwise) and left-hand use (turns counterclockwise).
FA-683
- Low heat-conduction type resin lever, perfect for industrial ovens.
- Safety design allows steam and hot air to escape through the gap in the door when the handle is rotated from 0° to 55°.
- Handle clicks and is held in place when rotated to 0°, 55°, and 90°.
- Pressing the door closes it lightly.
- Rolling action of roller allows smooth, secure, and airtight door closure. (Tightening: 11.5mm, from lightly closed to securely closed)
- Catch roller can be adjusted.
- Latch-type catch provides safety mechanism that does not place load on oven body or handle even if misoperated.
- Right-opening (right-turning) and left-opening (left-turning) available.
FA-684
- Low heat-conduction type resin lever, perfect for industrial ovens.
- Safety design allows steam and hot air to escape through the gap in the door when the handle is rotated from 0° to 55°.
- Handle clicks and is held in place when rotated to 0°, 55°, and 90°.
- Pressing the door closes it lightly.
- Rolling action of roller allows smooth, secure, and airtight door closure. (Tightening: 11.5mm. From lightly closed to securely closed)
- Right-opening and left-opening available.
FA-685
- Low heat-conduction type resin lever, perfect for industrial ovens.
- Turn handle 35° and door can be opened.
- Rolling action of roller allows smooth, secure, and airtight door closure.
- Hook on catch can be adjusted.
- For both left-hand and right-hand use
FA-702S-4
- To prevent accident by shut-up both handle and catch are equipped with the safety device. (Double safety escape mechanism)
- The catch is separated from the latch by pushing the inside safety push rod in an emergency so push the door for unlocking.
FA-740
- Stainless, corrosion-resistant. (FA-1740)
- Prevents spread of germs and mold. (FA-740)
- Emphasized hygienity with easy-to-clean design.
- Even when secured with a lock or padlock, this safety mechanism allows door to be opened from inside compartment using Inside Safety Pushrod (FC-700 / FC-701 / FC-702 / FC-702-B).
- Screws are hidden by the caps for cleaner appearance. (FA-740)
- Interchangeable with Airtight Safety Handles FA-602 / FA-662 / FA-772.
- Can be locked with a long shackle padlock. (C-555-40L/SL page 1255)
- For both left-hand and right-hand use.