CP-30-OB

• Non-combustible material (UL94 V-0) used
• Bushing is split, allowing quick additional installation.

CP-30-PG

• Removing cover creates large opening, allowing connector to be passed through.
• Shutter enables adjustment of passage to match amount of wiring.
• For panel thicknesses 0.8, 1.2, 1.6, 2.3, 3.2, 4.8mm.

CP-30-SIC-S

• Effective for preventing short-circuiting between storage batteries and misconnection during installation.
• Bright-color plastic, cap installation can be confirmed at a distance.
• Designed for repeated use

CP-30-WGO

• Drain water built up in casing.
• Built-in O-ring prevents loosening and provides watertightness of installation opening.
• Reduces temperature difference inside and outside casing, preventing water buildup from condensation.

CP-300-BW

• Protects against cable damage from panel hole.
• Features slits so that it can be installed in openings of almost any shape.
• Inside can be glued for even more secure installation.
• No wastage as it can be cut to the required length.

CP-30N-FF

• Materials used are compliant will UL standards.
• Can be attached one-touch.

CP-328

• Prevents the head of the screws clogged with dust.
• Prevents the screws that are rarely used from getting rusted.
• The washers can be used with either the bolt or flash head screw.

CP-419

• Use in combination with a lock as a pull. Separate handle installation in other location not required.

CP-434

• Large opening also allows cable with connector to be routed.
• Up to 5 cables with 3 to 12mm diameters can be routed together in one location.
• Cables can be clamped just by placing case flush on surface.
• Uses non-combustible resin (UL 94 V0).
• Protection class: IP54 equivalent

CP-437

• Protects exterior outlets, etc. from dust and wetness (not completely water-/dustproof)

CP-457-A

• Holder allows charger connector and cable to be easily and tidily kept.
• Also accommodates all other manufacturer charger connectors.
• Simply insert charger connector and connector is held.
• Allows charger cable to be kept simply by coiling around holder.
• Easy mounting. Mount simply by installing base with three M5 screws then mounting holder with one M4 screw.

CP-458-C

• Charger cable coils simply around holder, allowing connector and cable to be easily and tidily kept.
• Also accommodates all other manufacturer charger connectors.
• Simply insert charger connector and connector is held.
• Charger connector locks with key lock or dial lock to prevent tampering when not in use.
• Easy mounting. Install by mounting base with two M5 screws, then mount holder and fasten from connector pocket with two M5 screws.
• Japan Vending System Manufacturers Association standard lock can also be mounted.

CP-458-D

• Charger cable coils simply around holder, allowing connector and cable to be easily and tidily kept.
• Also accommodates all other manufacturer charger connectors.
• Simply insert charger connector and connector is held.
• Charger connector locks with key lock or dial lock to prevent tampering when not in use.
• Easy mounting. Install by mounting base with two M5 screws, then mount holder and fasten from connector pocket with two M5 screws.
• Japan Vending System Manufacturers Association standard lock can also be mounted.

CP-468

• Prevents mischief to EV connector during charging or when not in use.
• Can be used with a CHAdeMO connector.
  ※Cannot be used with some connectors. Contact us for details.
• 3 types available: with key (CP-468-1), with solenoid (LE-468), and holder only (CP-468-2).
• Open bottom on connector pocket prevents dust and dirt from collecting.
• Can be easily installed from rear with four M6 screws.
• Can also be used combined with CP-468-P-1 to prevent recharging connector terminal from getting wet (equivalent to IPX4).
• Connector lock/unlock can be controlled with received electric signal from main rapid recharger unit.
• Indicator for quickly checking whether locked/unlocked.
  Solenoid specifications (energized unlocked)
  Rated voltage: DＣ24V
  Rated current: 104mA
  Energization rate: 100％
  Ambient temperature: -10℃ to +50℃
  (no freezing)
  LED specifications
  Rated voltage: DC24V
  Rated current: 17mA
  Built-in resistor
  SW1, SW? specification
  Rated voltage: DC30V/3A (resistance load)
  (Minimum resistance load DC5V/160mA)

CP-500

• Latch lock for detached house delivery boxes.
• Keyless locking feature allows door to be locked even without key (unlocking requires key).
• Key only used for unlocking door, preventing unintended operation.
• Emergency unlocking mechanism allows escape in case of becoming locked in.