A-430

• Handle height is set about 23mm when closing door so inconvenience by the current protrusion is lessened.
• Stopper plate is secured when closing door.
• Waterproof (using O-ring and sheet packing)
• Handle cannot turn unless the handle is popped up. (double-lock mechanism)
• One-touch locking.
• For both left-hand and right-hand use. (standard: the right-hand use. Specify the left-hand use as needed.)

A-432

• TAK80 high-security lock is standard
• You can get the rod stroke of 18mm by pulling up the handle lever.
• The outside or inside can be selected according to the handle fixed position.
• Use the hinges B-1071-3D or B-71-3D together.
• Striker is interchangeable with recommended Hinge B-1071-3D, if needed to allow easier door opening arrangement.
• Multi-point tightening enabled.
• For both left-hand and right-hand use (the Right-hand use can be switched to the left-hand use or vice versa by reversing the striker)

A-436

• With indicator to prevent forgotten locking.
• Recombinable with any TAK series high-security lock.
• One-touch mounting on a stopper plate.
• One-touch installation, no screws or nuts.
• Install and assemble in much shorter time.
• Ensure uniform workmanship.
• IPX5-equivalent waterproofing

A-437

• The lock is built in downward, so that it is difficult to manipulate the lock in any unjust way.
• The space box is separable, allowing only the pop handle to be sold and used for a customer's original space box.
• The guard plate is built in to prevent the lock from the handle front with a drill.
• The double-latch mechanism ensures secure locking.
• The specially designed built-in lock ensures high operationality.
• A standard lock approved by Japan Vending System Manufacturers Association can be incorporated. However, it may be incompatible with some key plate forms.
• One-touch locking only by pressing the handle.
• For both left-hand and right-hand use. (the left-hand or right-hand use can be changed by reversing the cam)

A-440

• The waterproof lock C-330 is incorporated.
• The key can be removed only when locking so you can be sure to lock.
• Thin type; the height from the door surface is 10mm. Suitable for the cases using the heat shut-off plates.
• For both left-hand and right-hand use. (the left and right can be changed by reversing the cam)

A-45

• The lock comes standard with the TAK60, a new-style reversible key with an easy-to-use dustproof shutter. (A-45-1-TAK60)
• For both left-hand and right-hand use.

A-452

• New, low-cost design.
• Closing the handle turns the catch, and door is closed airtight.
• Can also be used combined with a terminal unit (A-452-S, A-452-P) to provide multi-point locking. Ideal for tall server racks.
• Installs in narrow space, allowing efficient use of space inside casing.
• For both left-hand and right-hand use.

A-458

• A handle for installation on the side of a door.
• Installation on the side of the door means that no burden is placed on the door face or on the design of the board interior.
• The degree of tightness can be altered using the catch adjuster. (3 levels)
• Can be combined with the high-security TAK series of locks.
• The left-hand or right-hand use. (Drawings and photo show the right-hand use.)

A-462

• The handles are attached outside of the packing so no calking etc is needed for the handle fixed parts when making theses watertight.
• The handles are attached outside of the sealing area so the inside spaces can be used maximum.
• Their body is slim and also a large stroke of 32mm can be obtained.
• It is not necessary to change the rod length no mater how the case needs to be changed in size.
• The rod catch and the recommended hinge B-71-3 are interchangeable when fixing. Also the upper and lower handle panel drilling holes are symmetrical so it is easy to design the case (these can be used with various doors).
• The lock comes standard with the TAK60, a new-style reversible key with an easy-to-use dustproof shutter. (A-462-1-1-TAK60)
• Right-hand use or Left-hand use, with lock or without lock.

A-463

• Three-point tightening mechanism developed exclusively for outside systems.
• The handles are attached outside of the packing so these are water-resistant.
• Their body is slim and also a large stroke can be obtained.
• Both upper and lower rod ends use the plastic rollers so their movement is smooth.
• The rod catch and the recommended hinge B-71-3 are interchangeable when installing, so both left-hand and right-hand use of the door can be selected. (Panel cuts are symmetrical)
• It is not necessary to change the rod length no mater how the case is changed in size.
• The compact slim pin tumbler is incorporated for ensuring security
• For both left-hand and right-hand use.(The left-hand or right-hand use can be changed by reversing the control center)
• Drawings and photo show the right-hand use.

A-464

• Waterproof. (using O-ring and sheet packing)
• The lock comes standard with the TAK60, a new-style reversible key with an easy-to-use dustproof shutter. (A-464-L-TAK60)
• Installation is compatible with A-160 and A-240 etc.
• For both left-hand and right-hand use. (the left-hand or right-hand use can be changed by reversing the cam and stopper plate)

A-464-C

• Installation is compatible with A-160 and A-240 etc.
• The height of the stopper from the attachment surface is kept to 12.5 mm, to reduce the load on the interior of the panel.
• For both left-hand and right-hand use. (the left-hand or right-hand use can be changed by reversing the cam and stopper plate)

A-464-F

• The lock comes standard with the TAK60, a new-style reversible key with an easy-to-use dustproof shutter.
• Installation is compatible with A-160 and A-240 etc.(A-464-F-1)
• Lifting and lowering the handle moves the stopper plate back and forward because they are interlocked. The tightening mechanism is incorporated.
• Right-hand use.

A-464-L

• Waterproof. (using O-ring and sheet packing)
• The lock comes standard with the TAK60, a new-style reversible key with an easy-to-use dustproof shutter. (A-464-L-TAK60)
• Installation is compatible with A-160 and A-240 etc.
• For both left-hand and right-hand use. (the left-hand or right-hand use can be changed by reversing the cam and stopper plate)

A-464-SF

• Previous models A-1464/A-464 designed with indicator.
• Height from installation surface to stopper plate is a minimal 12.5mm, so places no burden on design of board interior.
• Interchangeable with previous models A-1464/A-1464-C, A-464/A-464-C, etc.
• For both left-hand and right-hand use (left and right can be changed by reversing the cam and stopper plate)