C-346

• With side bar lock mechanism, illegal unlocking by picking etc. is prevented.
• With idle ring (optional) and guard plate, forcible turning by pipe wrench, screwdriver etc is prevented.
• Key thickness is 2.5mm for durability.
• Keyway is warded to prevent illegal unlocking.
• Key is cut bias so it's difficult to duplicate. (key corner pin groove machined)
• Smooth reversible key structure.
• Key can be removed only when locking so you don't fail to lock.

C-349N

• Can be installed by one-touch.
• The embedded type:projections on the surface are small.
• A one size is applicable to panel thickness of 0.8 to 2.0mm.

C-365

• Key is cut bias so it's difficult to duplicate.
• A4-column 15-pin tumbler structure prevents illegal unlocking by picking.
• A one master is applicable to 6,435 sets.
• Smooth reversible key structure.
• Key can be removed only when locking so you don't fail to lock.
• The special ball against drill etc can be built in. (optional)
• Forcible unlock by pipe wrench is prevented with a idle ring. (C-288-OP-2 optional)

C-365-SD

• Domed flanged cylinder (induction-heated SUS)
• Key is cut bias so it's difficult to duplicate.
• The four-column 15-pin tumbler structure prevents illegal unlocking by picking.
• A one master is applicable to 6,435 sets.
• An anti-picking option may be integrated into the cylinder.
• Smooth reversible key structure.
• Key can be removed only when locking so you don't fail to lock.

C-367-A

• It's large-sized and durable and suitable to tighten heavy doors.

C-374

• It's the embedded type so the external appearance is good.
• For both left-hand and right-hand use.

C-399

• This product provides excellent resistant to corrosion because baking enamel coating is applied after anticorrosive painting.
• It can be unlocked from the backside by the thumb turn.
• Most suitable for the lock of a thick hinged door.
• This type may be installed for either right-hand or left-hand use.

C-4-1

• Key can be inserted/removed at 360° turn when locking/unlocking.

C-4-2

• Key can be inserted/removed at 360° turn when locking/unlocking.

C-4-3

• Detent effects are obtained when operating the key.
• Key can be inserted/removed by turning 90°only when locking.
• Key is a reversible type.

C-4-4

• Key-operated deadlock.
• Reversible lock

C-4-CAB

• Wide range of individual keys (4,000 variations)
• Key can be inserted and removed whether lock is engaged or released.
• Reversible-type key

C-40-J

• Can be joined easily to rod and latch locks such as the C-1040/C-40/C-58/C-628 etc.

C-430

• The cylinder lock is built into the high-security TAK 80 lock.
• Can be used on handles equipped with a TAK 80 lock.
• Key can be removed only when locking so you don't fail to lock.

C-440

• The caps are waterproof so these are suitable for outdoor use.
• The locking mechanism is incorporated so high security is ensured compared with the current cylinder caps.
• These are very slim the lock is released by sliding the key from the bottom.