Before
Features
- Press smart lock button on worn remote control to lock or unlock. Operation can still be done by remote control or pushbutton.
- Smart lock signal range adjustable in 7 levels.
- Pushbutton, harness can be used with LE-830.
Specification
- [Wireless]
- Category: Specified low-power radio
- Frequency: 429 MHz [Controller LE-840-CO]
- Material: Superheat-resistant ABS resin
- Water resistance: Non-resistant
- Operating voltage: DC 10 V to 32 V
- Consumption current:
Approx. 320mA / 160mA (DC12V / DC24V) operating
Approx. 2mA / 1mA (DC12V / DC24V) standby
※ Electric lock/antenna unit unconnected
During sleep approx. 1mA or less - Working temperature range: -20℃ to +70℃ [Remote control LE-840-RC]
- Material: Polycarbonate resin (PC)
- Water resistance: Resistant
- Battery: CR2450 X 2
- Battery life: Approx. 1 year
- Working temperature range: -10℃ to +60℃ [Antenna unit LE-840-AU (Built into LE-840 electric lock)]
- Material: AAS resin
- Water resistance: Resistant (surface being attached to requires waterproofing) [Electric locks LE-840-□-□]
- Material: Main Body Aluminium alloy (ADC)
Cover: Polycarbonate resin (PC) - Finish: Baked (Silver metallic)
- Rated voltage: DC12V: DC24V (continuous)
- Current consumption: Approx. 363 mA / 181mA (when unlocking)
- Working temperature range: -5℃ to +40℃
- Key number: Keyed to differ
- Accessories: LE-840-RC 1 unit, two keys, screw caps, screw set
Specific Uses
- Specially equipped vehicles, collection and delivery vehicles, cash transport vehicles
Remarks
- Electric lock may not operate if frozen.
- Not interchangeable with LE-830 controller, antenna, remote control.
- Solenoid or actuator can be used as terminal. Contact us for details.
- Care should be taken to avoid getting water, etc. on controller and harness connection.
- Signal range may be decreased and the electric lock may be no longer lockable/unlockable if used in the vicinity of a high-field radio/TV transmission station, antenna tower, etc.
- Before using smart lock, be sure not to set a driver's seat within signal range for safety reasons.
- When wiring harnesses, turn power off to the controller before plugging/unplugging.