Before
Features
- Electromagnetic lock flush handle with holding-type solenoid.
- The lock moves in either of two directions, to unlock or lock, where it is then held unenergized, by applying pulse voltage in either a positive direction or negative direction.
- Can be unlocked with a key in emergency.
- TAK-series key can be used to match security system.
- Interchangeable with A-160-A-1, A-240-A-1, A-464-1, etc.
- It is not necessary to install complex electrical components.
Specification
- Material: Zinc alloy (ZDC)
- Finish: Satellite chrome plating (MZCr)
- Applicable panel thickness: 1 to 2.3mm
- Rated voltage:
DC12V (Intermittent rating: Duty cycle 10%: Maximum energized time 0.5s)
Unlock: Red+ Blue-
Lock: Red- Blue+ - Power consumption: 4.8W
- Consumption current: 400mA
- Usable temperature range: -10℃～+50℃
(no freezing) - Operating humidity range: 85%RH or less
(no condensation)
Specific Uses
- Avoid using the product in outdoor installation or in places where it is exposed to water splashes and the like.
- When installing the handle with the protective cover attached on the back, be careful not to trap lead wires between the cover and the panel.
- If the lead wire is in contact with the catch, there is a danger the lead wire will be damaged by rubbing.
- Maximum applicable panel thickness is 1mm;
or 2.3mm with protective cover removed. - To prolong the life of this item, lubricant should be applied regularly to the moving parts.
- Key can only be inserted/removed when locked by turning 140°.
- TAK70 key differences