Features
- Both front and rear surface attachment. (remove the cover when choosing the front surface attachment)
- Can be locked with a remote control.
- The protective cover is included in accessories. (this can be removed)
- The locking verification switch is incorporated. (LE-33-10-S)
Specification
- Rated voltage: DC24V±5%
- Duty cycle: 100% (continuous rating)
- To be locked by turning on power (excitation locking type)
- Ambient temperature: -5℃ to +40℃
(non-condensing) - Operating humidity range: 85％RH or less (non-dewing)
Specific Uses
- Pass boxes and various cases
Remarks
- Rated of switch (resistance load) for
LE-33-10-S: AC125V 1A. DC30V 0.5A. - Make sure that the screw does not protrude from the solenoid installation surface.
- The latch stroke, the retraction force and the extension force are value in the horizontal installation.
- The rated voltage (continuous rating) is at a power consumption that causes the temperature of the coil to reach 65℃ when the ambient temperature is 40℃.
- When continuously energized, the solenoid becomes hot (around 70℃). If there is a risk of it being touched, measures should be taken to prevent burns with consideration given to heat radiation.
- Remove the load on the latch when operating electrically.
- Solenoid has no polarity (+ / -).