LE-33-11 SOLENOID LOCKS (LOCKED WHEN TURNED ON)

LE-33-11 SOLENOID LOCKS (LOCKED WHEN TURNED ON) catalogue manual
LE-33-11 SOLENOID LOCKS (LOCKED WHEN TURNED ON) catalogue manual

Features

  • Both front and rear surface attachment. (remove the cover when choosing the front surface attachment)
  • Can be locked with a remote control.
  • The protective cover is included in accessories. (this can be removed)
  • The locking verification switch is incorporated. (LE-33-10-S)

Specification

  • Rated voltage: DC24V±5%
  • Duty cycle: 100% (continuous rating)
  • To be locked by turning on power (excitation locking type)
  • Ambient temperature: -5℃ to +40℃
    (non-condensing)
  • Operating humidity range: 85%RH or less (non-dewing)

Specific Uses

  • Pass boxes and various cases

Remarks

  • Rated of switch (resistance load) for
    LE-33-10-S: AC125V 1A. DC30V 0.5A.
  • Make sure that the screw does not protrude from the solenoid installation surface.
  • The latch stroke, the retraction force and the extension force are value in the horizontal installation.
  • The rated voltage (continuous rating) is at a power consumption that causes the temperature of the coil to reach 65℃ when the ambient temperature is 40℃.
  • When continuously energized, the solenoid becomes hot (around 70℃). If there is a risk of it being touched, measures should be taken to prevent burns with consideration given to heat radiation.
  • Remove the load on the latch when operating electrically.
  • Solenoid has no polarity (+ / -).