Features
- Frame-side type electric lock
- Slim 20 mm
- Unlocked when energized
- Use together with a cam lock to unlock with a key for emergencies (power outages, etc.)
- Locked information signal output possible
(no voltage output when stopper plate engages lock) - LED (green). Lights when unlocked (solenoid energized).
- Internal diode for contact protection.
- Use freely for left-hand or right-hand use (countersink on both sides for installation)
Specification
- Rated voltage: DC24V ±5%
- Power consumption: Approx. 2.2W (approx. 90mA) (SOL: 80mA, LED: 10mA)
- Energization rate: 100% (continuous rating)
- Switch rating: DC30V 0.1A (resistance load)
- Material: Case: Aluminum die casting (ADC)
Latch trigger: Cold Rolled Steel plate (SPCC) - Accessories: stopper plate
- Ambient temperature: -5°C to +40°C
(to prevent freezing) - Ambient humidity: 85%RH or less
(to prevent condensation) - Locking: When door closes, trigger is. pushed and latch mechanically locks.
- Unlocking: When solenoid is energized, the latch unlocks, and door can be pulled open toward you. (When energized only)
Specific Uses
- Lock/unlock control system for compact boxes such as keybox locks
Remarks
- Remove load from latch when energized and moving.
- High temperature when solenoid continuously energized (around 70°C). If contact with hands is expected, use burn prevention measures with consideration for heat dissipation.